TOPCON DT-200
​PRECISE ANGLES WITH DIGITAL DATA COLLECTION

The DT-200 series integrates the same high-quality advanced absolute circle reading technology found in Topcon high-performance total station products for high accuracy field calculations.
Picture
DT-200
  Features and Benefits:
  • Longer battery powering duration
    Longer battery powering durations using alkaline batteries. Continuous angle measurement for 150 hours (DT-213). Laser continuous angle measurement for 45 hours.
  • Absolute encoder is used
    Detection of 0° position is no longer needed. Stable, high-accuracy measurement.
  • Laser pointer
    The laser pointer is injected in collimation direction by simply operating one switch. Workers can perform work without guidance by observation personnel.
  • Excellent waterproof structure
    The theodolite body is guarded against a sudden torrential rain and dirt. The theodolite can be used reliably at work sites under severe conditions. 
    JIS C 0920 protection class IP66 (Dustproof and waterproof types)


With Topcon’s DT-200 You’ll be Up And Working Fast
Thanks to it’s simple interface and large, easy-to-see backlit LCD. There’s an optical plummet that makes set up over a control point easy, and a tilt sensor that provides ±3 minute angle correction. The DT-200 Series features two magnification choices - 26x and 30x, a super-short 3’ minimum focus distance for those tight areas, and angle accuracies of 5, 7, and 9 arc seconds.

Optical Centered Laser L = Laser
Add a whole new dimension of accuracy and confidence to your alignment jobs with Topcon’s unique DT-200L Series, featuring a 633nm Class II laser beam. It can be used anywhere on your site and seen clearly in direct sunlight up to 165’. Now you can easily and accurately place anchor bolts at regular intervals on a line, set an angle and use the beam to verify your tape measure is properly aligned for the next stake, or “sight in” footers, frames, and tilt-up walls, all without pulling a string!

Laser accurate  (DT-200L Series only) Topcon’s World Leading laser technology is incorporated in to the DT-200L Series to aid in fast, confident alignment. The 633nm beam is emitted directly from the aperture, but does not impede viewing, in fact it’s not even visible when sighting through the lens. (Class II laser beam)

Extremely Low Power Consumption
The DT-200/DT-200L Series provides up to 140+ hours of operation in Angle Measurement mode on 4AA batteries, better than any other model! And when it is time to change batteries, it’s as easy as snapping out the old ones and snapping in the new. Even when using the laser, power consumption is extremely low providing 80 hours of continuous operation. 


Water And Dustproof
Get the work done, even in less than perfect condi- tions. All DT-200/DT-200L Series instruments are rated to IP66, standing up to even the rainiest conditions. And each telescope is gas charged to further avoid moisture intrusion and limit or eliminate lens fogging. 

Vertical Accuracy
Need greater accuracy the DT-205 comes with a vertical compensator that can adjust the instrument up to 3 minutes or range.  

Simple Operation 
Each DT-200 provides large, high-contrast, back-lit LCD’s on both sides of the instrument. And the five button interface panel is so simple to use your crew won’t require any special training to put your DT-200 to use day-in and day-out.   (DT-209/209L: single side display) 

Fast, Reliable Data Gathering  
Eliminate the notebook, pen, and hassle of pages of note taking. Easily connect the DT-200/DT-200L Series to a Field Controller or a laptop computer for continuous download of angle measurements as they are made.